Involvement of specific mechanism in plasmid DNA uptake by mouse peritoneal macrophages

Lamina-associated polypeptide (LAP)2, which directly interacts with B-type lamins and chromosomes, is an integral membrane protein specifically distributed along the inner nuclear membrane of the nuclear envelope. Multiple regions of its large nucleoplasmic domain promote this localization, including the first (residues 1-296) and the second (residues 298-409) halves of the LAP2 N terminus. The second half is involved in LAP2 association with the nuclear lamina [Furukawa, K., Panté, N., Aebi, U. & Gerace, L. (1995) EMBO J. 14, 1626-1636]. In this study to further define its role, we examined which domain of B-type lamin interacts with LAP2 by means of a binding assay with bacterially expressed proteins and a yeast two-hybrid system. We found that amino acids in the region of residues 78-258 of the lamin B1 rod domain directly bound with LAP2. The data suggest that LAP2 may modulate the assembly of nuclear lamins.     

EMS1 gene expression in primary breast cancer: relationship to cyclin D1 and oestrogen receptor expression and patient survival

The EMS1 and CCND1 genes at chromosome 11q13 are amplified in about 15% of primary breast cancers but appear to confer different phenotypes in ER positive and ER negative tumours. Since there are no published data on EMS1 expression in large series of breast cancers we examined the relationship of EMS1 expression with EMS1 gene copy number and expression of mRNAs for cyclin D1 and ER. In a subset of 129 patients, where matched tumour RNA and DNA was available, EMS1 mRNA overexpression was associated predominantly with gene amplification (P = 0.0061), whereas cyclin D1 mRNA overexpression was not (P = 0.3142). In a more extensive series of 351 breast cancers, there was no correlation between cyclin D1 and EMS1 expression in the EMS1 and cyclin D1 overexpressors (P = 0.3503). Although an association between EMS1 mRNA expression and ER positivity was evident (P = 0.0232), when the samples were divided into quartiles of EMS1 or cyclin D1 mRNA expression, the increase in the proportion of ER positive tumours in the ascending EMS1 mRNA quartiles was not statistically significant (P = 0.0951). In marked contrast there was a significant stepwise increase in ER positivity in ascending quartiles of cyclin D1 mRNA (P = 0.030). A potential explanation for this difference was provided by the observation that in ER positive breast cancer cells oestradiol treatment resulted in increased cyclin D1 gene expression but was without effect on EMS1. The relationship between EMS1 expression and clinical outcome was examined in a subset of 234 patients with median follow-up of 74 months. High EMS1 expression was associated with age > 50 years (P = 0.0001), postmenopausal status (P = 0.0008), lymph node negativity (P = 0.019) and an apparent trend for worse prognosis in the ER negative subgroup. These data demonstrate that overexpression of EMS1 mRNA is largely due to EMS1 gene amplification, is independent of cyclin D1 and ER expression and, in contrast to cyclin D1, is not regulated by oestrogen. Independent overexpression of these genes may confer different phenotypes and disease outcomes in breast cancer as has been inferred from recent studies of EMS1 and CCND1 gene amplification.     

Consideration of conformational transitions and racemization during process development of recombinant glucagon-like peptide-1

This article summarizes the results of a combined analysis from two identical multicenter clinical trials that investigated the efficacy and safety of sertraline versus placebo for treating panic disorder. Patients with panic disorder who were treated with sertraline had a statistically significant reduction in the mean number of panic attacks per week (the primary efficacy measure) as compared with placebo (4.8 vs. 2.5, p < .001). Sertraline-treated patients also showed greater improvement that was statistically significant on several ratings of panic disorder symptomatology and functioning. The design characteristics, clinical rating measures, and outcome measures in these trials included most of the features deemed essential by Shear and Maser (1994) in their summary of the NIMH Consensus Conference for the development of standardized assessments for panic disorder. This suggests that the NIMH Consensus Conference played a key role in developing successful multicenter pharmacological treatment studies, such as this one that ultimately demonstrated that sertraline was an effective treatment for panic disorder.     

RP-HPLC binding domains of proteins

Procedures have been developed to identify the chromatographic binding domains of horse heart cytochrome c (Cyt c) and bovine growth hormone (bGH) during their interaction with reversed-phase sorbent materials. The procedure involves adsorption of the protein solute to the chromatographic sorbent, followed by proteolytic cleavage. Comparison of the proteolytic map obtained for Cyt c and bGH in free solution with the corresponding map obtained when these proteins are adsorbed to the chromatographic sorbent revealed significant differences in the digestion pattern. Following characterization of the peptides generated in both maps, the results indicated that specific regions on the surface of both Cyt c and bGH are inaccessible to tryptic cleavage when adsorbed to the hydrophobic surface of both a C-4 and a C-18 sorbent. Based on the assumption that the region of the protein surface that is in contact with the sorbent remains intact and bound to the sorbent during the digestion step, while the protein surface that is exposed to the solvent is accessible to proteolysis, the regions that were inaccessible to tryptic digestion were found to correspond to hydrophobic domains on the protein surface. These results also suggest that the three-dimensional structures of these proteins remain largely intact upon adsorption to the hydrophobic surface.     

Molecular and geographic patterns of tuberculosis transmission after 15 years of directly observed therapy

Stevioside is a sweet-tasting glycoside, composed of stevia, a diterpenic carboxylic alcohol with three glucose molecules, mainly used as a substitute for non-alcoholic sweetener. It has previously been shown to reduce blood pressure in studies in animals and human. The effect of intravenous stevioside on the blood pressure was studied in spontaneously hypertensive rats (SHR). The hypotensive effect on both systolic and diastolic blood pressure was dose-dependent for intravenous doses of 50, 100 and 200 mg/kg in conscious SHR. The maximum reductions in systolic and diastolic blood pressure were 31.4 +/- 4.2% and 40.8 +/- 5.6% (mean +/- SEM) respectively and the hypotensive effect lasted for more than 60 min with a dose of 200 mg/kg. Serum dopamine, norepinephrine and epinephrine levels were not changed significantly 60 min after intravenous injection of stevioside 100 mg/kg in anesthetized SHR. The present data show that stevioside given intravenously to conscious SHR was effective in blood pressure reduction and there was no change in serum catecholamines in anaesthetized animals with this natural compound.     

Noninvasive determination of cardiac output using single breath CO2 analysis

OBJECTIVE: To examine the utility of single breath CO2 analysis as a noninvasive measure of cardiac output. SETTING: An animal laboratory in a university-affiliated medical center. DESIGN: A prospective, animal cohort study comparing 21 parameters derived from single breath CO2 analysis with cardiac output determined by an ultrasonic flow probe. SUBJECTS: Six healthy adult sheep. METHODS: The single breath CO2 analysis station consists of a mainstream capnometer, a variable orifice pneumotachometer, a signal processor, and computer software with capability for both on- and off-line data analysis. Twenty-one derived components of the CO2 expirogram were evaluated as predictors of cardiac output. Cardiac output was manipulated by successive injections of a hydraulic constrictor placed around the inferior vena cava. MEASUREMENTS AND MAIN RESULTS: Thirty-four measurements of cardiac output were available for comparison with derived variables from the CO2 expirogram. Stepwise linear regression identified two variables that were most predictive of cardiac output: a) the angle between the slope lines for phase II and III of the CO2 expirogram divided by the volume of CO2 per breath (angle/mL CO2); and b) the slope of phase II. The multivariate equation was highly statistically significant and explained 94% of the variance (adjusted r2 = .94, p < .0001). The bias and precision of the calculated cardiac output were .00 and .23, respectively. The mean percent difference for the cardiac output estimate derived from the single breath CO2 analysis station was 0.36%. CONCLUSIONS: Our data indicate that analysis of the CO2 expirogram can yield accurate information about the cardiovascular system. Specifically, two variables derived from a plot of expired CO2 concentration vs. expired volume predict changes in cardiac output in healthy adult sheep with an adjusted coefficient of determination of .94. Prospective application of this technology in the setting of lung injury and rapidly changing physiology will be essential in determining the clinical usefulness of the technique.     

IL-10 inhibits alloreactive cytotoxic T lymphocyte generation in vivo

In this report, we present evidence that the CTL response directed against MHC Class I allo-determinants can be inhibited as a result of IL-10 expression in vivo. The presence of localized IL-10 secretion at the site of allogeneic tumor cell challenge resulted in marked inhibition of the CTL response and allowed growth of the tumor in the allogeneic host. Using purified CD4+ T cells from mice immunized in the presence or absence of IL-10, we have shown that the loss of alloreactivity as a consequence of IL-10 expression results from the inhibition of CD4+ T cell function. The expression of either IL-2 or IFN-gamma with IL-10 locally at the time of allogeneic cell challenge completely restored CTL alloreactivity, suggesting that the action of IL-10 could be bypassed by providing helper T lymphocyte-derived cytokines of the Th1 type at the site of immunization. Inhibition of alloreactivity by IL-10 was observed using either purified macrophages or dendritic cells as APC in an in vitro assay. Thus, the expression of IL-10 following antigenic challenge (such as that observed in Th2-like immune responses) may profoundly limit the ability for generating functional CTL in vivo.     

Performance relationships in PVC–plasticizer dry blending

The phenomenon of plasticizer acceptance by poly(vinyl chloride) (PVC) in hotprocess dry blending is examined via scanning electron microscopy, mercury intrusion porosimetry, and torque rheometer measurements. The effects of granule porosity, resin molecular weight, and synthesis recipe in PVC manufacture by the suspension process are related to the rate of plasticizer acceptance. For a PVC resin to dry blend, i.e., to become a free-flowing powder when mixed with plasticizer under hot-processing conditions, the resin granules must be porous. Porosity arises from interstices between primary PVC particles. At a given granule porosity, an increase in primary particle agglomeration adversely affects dry blend performance. At constant molecular weight and for resins manufactured by a given recipe, dry-blend performance is quantitatively described by granule porosity. With an increase in resin molecular weight, a greater granule porosity is required to maintain an equivalent dry-blend time (DBT). Accordingly, for most suspending agent recipes, DBT is dependent directly upon granule porosity and inversely upon molecular weight. However, if the suspending agent used in resin manufacture is an excessively rapid film former, dry-blend performance with molecular weight variation is dependent upon the suspending agent's concentration, not upon granule porosity, which must be adequate, nor upon the resin's molecular weight. An interfacial film-forming suspending agent enhances fusion of primary PVC particles at the suspension granule—water interface, increasing the granule's “pericellular membrane” thickness. This membrane, a PVC skin, does not significantly influence dry-blend performance with low- or intermediate-viscosity plasticizers. The particle skin does impede dry-blend rates with high-viscosity, poorly solvating plasticizers, but this effect can be negated in part by increasing the diameter of pore openings in the topographical skin. Dry blending occurs below the glass transition temperature (T_g) of PVC with low-viscosity plasticizers and above the T_g with high-viscosity, poorly solvating modifiers. The influence of resin and plasticizer variables indicates the dry-blend phenomenon to be a diffusion-controlled process. The rate of dry blending is dependent upon two mechanisms: (1) the rate of pore penetration—which exposes the plasticizer to a much greater surface area than if it remained exterior, encapsulating the granule—and (2) the rate of plasticizer diffusion into the PVC matrix.     

Factors affecting the corrosion rate of steel in carbonated mortars

The corrosion of steel in carbonated mortar has been investigated by monitoring polarization resistance, corrosion potential and mortar resistivity. The results suggest that factors such as relative humidity and chloride contamination affect the corrosion rate via their influence on mortar resistivity. To account for the observed electrochemical relationships, most notably the linear correlation between corrosion rate and conductivity, and the exponential increase in corrosion rate with fall in corrosion potential, it is proposed that the corrosion kinetics of steel in carbonated mortar are subject to anodic control with the anodic reaction rate being limited by the resistance of the mortar. In this model, termed anodic resistance control, resistivity is viewed as a factor which may limit a half reaction rate in a similar way to diffusion and activation polarization. It is also shown that, when such a model is operating, the use of polarization resistance to monitor corrosion rate changes may still be justified provided the cathodic reaction rate is an exponential function of potential.